Oregon Scientific EC101 - Alarm

EN
5
1. Press SET CLOCK.
2. Press SET + / - to change the settings. Press and hold
SET + / - to rapidly change values.
3. Press SET CLOCK to conrm.
The settings order is: 12 / 24 hr format, time zone,
time, year, calendar format (m / d), date.
Time zone offset sets the clock + / - 23 hours from the
received clock signal time.
If you enter +1 in the time offset setting, this will give you
your local time plus one hour. If you are in the US set the
clock to:
0 Pacic time +1 Mountain time
+2 Central time +3 Easter time
Select language to display weekday:
Press LANGUAGE repeatedly to select between ENG /
FRE / GER / ITA / SPA.
To save setting, do not press any key for 5 seconds.
ALARM
To set the alarm:
1. Press
SET + / - to enter alarm setting.
2. Press
SET + / - repeatedly to adjust the alarm time.
To rapidly change value, press and hold key.
To save setting, do not press any key for 5 seconds.
indicates alarm is on.
Select between beep alarm or radio alarm:
• Slide ALARM
/ switch to select.
Adjust volume:
• Slide ALARM HI / LO to select.
To activate / deactivate alarm:
• Press
ON / OFF.
To silence the alarm:
• Press SNOOZE / TALK to silence it for 8 minutes.
OR
• Press any key to turn the alarm off and activate it again
after 24 hours.
RADIO
1. Press and hold ON / OFF to turn radio on.
2. Press and hold TUNE + / - to auto search or press
TUNE + / - to adjust frequency marginally.