EasyManua.ls Logo

Oregon Scientific GR101H - Warnings

Oregon Scientific GR101H
50 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
EN
EN
Symptom Check Remedy
Scale
shows
when
weighing
The scale
is over-
loaded
The
maximum
weight
is 150kg
(330 lb /
23st - 8lb).
Remove the
weight from
the scale.
Weight
does not
display
Retry
measuring
Wait
until the
Reception
icon
appears.
shown
on the
display
The
weight
on the
scale is
unevenly
distributed
or
unstable
Make sure
to remain
still and
place the
scale on a
at surface.
Use the
carpet feet if
the ground
is carpeted
or uneven.
shown
on the
display
You have
stepped
on the
scale too
early
For guest
user, wait
until the
LCD is
blank. For
user with
saved
settings,
wait until
the display
shows
before
stepping on.
shown
on the
display
The Scale
is not
properly
calibrated
Lift the
Scale up,
then place it
back on the
oor to allow
for self-
calibration.
Safety and Care
CARING FOR YOUR BODY FAT
MONITOR
To ensure you receive the maximum
benet from using this product, please
observe the following guidelines.
Clean with a damp cloth. Do
not use abrasive or corrosive
cleaning agents.
Do not attempt to repair the
product yourself. Contact
the dealer or a qualied
repairman if the product
requires servicing.
Do not store the Scale in an
upright position.
Do not place objects on the
Scale or Remote Monitor.
Do not expose the product
to excessive force, dust,
temperature uctuations, or
humidity.
Allow the Scale to settle for
at least 30 minutes whenever
there is a sudden change in
ambient environment (e.g.,
from an outdoor area to an
air conditioned room).
SAFETY PRECAUTIONS
Please observe the following safety
precautions when setting up and using
your Body Fat Monitor.
13
GR101_E_V0.INDD 2005.8.15, 9:29 AM13

Related product manuals