Scale Unit Remote Unit
8x AA Batteries 4x Carpet Feet
User Manual Warranty Card
PLACING THE UNITS
The Scale and the Remote Monitor
should be within 8 metres of each other,
in order to ensure proper reception.
Remote Monitor Installation
Mount or place the Remote Monitor on a
wall or a at surface as shown below. For
best results, it should be located within 8
meters of the Scale. Avoid obstructions
such as walls or heavy furniture.
Scale Placement
For best results, place the Scale on a at,
even surface. Use the supplied carpet
feet if the Scale is to be placed on carpet.
NOTE
Leave the Scale on the oor for 5
seconds to allow for self-calibration.
BEFORE YOU START
1. Install the supplied batteries into both
the Scale and Remote Monitor.
UNPACKING THE PRODUCT
When you unpack your product, make
sure to keep all the packing materials in
a safe place, in case you need to later
transport or return it for servicing. In the
box, you will nd:
3
EN
To Next Page
Loading...