Oregon Scientific GR101H - Using Your Monitor; Measurement Modes

EN
EN
2. Press and hold SET. The Remote
Monitor will prompt you for:
a. Gender: Male /
Female
b. Birth Month
c. Birth Year icon appears
d. Height:
• In centimetre (cm) if kg
(kilogram) weight unit was
selected.
• In feet and inches if lb
(pound) or st-lb (stone)
weight unit was selected.
NOTE
Press
/
to adjust the
values of each setting. Press SET
to conrm. Press to exit any
time.
User Profile
SETTING USER PROFILE
With this product, you can set and store
the age, gender, and height for up to four
people (User 1 to 4) who regularly use the
Body Fat Monitor.
NOTE
If the batteries are low, you cannot
store the height and age to memory.
1. On the Remote Monitor, each user is
represented by one of the four User
Switches. Press 1, 2, 3, or 4 to select
a user.
NOTE
Make sure not to store your
height and birth date over someone
else’s existing prole.
2. On the Remote Monitor, press and
hold SET to select, in order:
NOTE
Press
/
to adjust the
values of each setting. Press SET
to conrm. Press to exit any
time.
a. Weight unit:
kg (kilogram), lb (pound), or st-lb
(stone)
b. 12- or 24-hour format
c. Current hour
d. Current minute
e. Current year
f. Date/Month or Month/Date
format
g. Current Month
h. Current Date
USER PROFILE MEASUREMENTS
Once you set a User Prole, the GR101
can automatically calculate the body
mass index (BMI), Body Fat Percentage,
and Body Water measurements.
1. Press the User Switch (1 to 4) that
has your User Prole congured.
2. Your prole will appear on-screen.
Once the Reception icon blinks
and the Scale’s LED Indicator is
blank, the Remote Monitor is ready to
receive your weight information.
4
GR101_E_V0.INDD 2005.8.15, 9:28 AM4