Oregon Scientific RMR112 User Manual

1
GB
Multi-Channel IN-OUT Thermometer
with Cable Free Sensor and RF Clock
MODEL: RMR112
USER'S MANUAL
INTRODUCTION
Congratulations on your purchase of the RMR112 Multi-Channel
In-Out Thermometer with 433MHz cable free sensor and
radio-controlled calendar clock.
The basic package comes with a main unit, which is the
temperature and calendar clock station, and a remote unit, the
thermo sensor.
The main unit has large read-outs for indoors temperature,
calendar clock and temperatures collected and transmitted by the
remote unit. The main unit can support up to three remote units.
The main unit is capable of keeping track of the maximum and
minimum temperature of different sites. And no wire installation
is required and the RMR112 operates at 433MHz.
As for the calendar clock, it is radio-controlled. It automatically
synchronizes its current time and date when it is brought within an
approximate 1500km radius of the radio signal generated from
Frankfurt, Germany (DCF77).
You can also set the calendar clock manually when it is off range.
Other features include four-language display, four-step crescendo
dual alarms and interchangeable display modes.
MAIN FEATURES

Oregon Scientific RMR112 Specifications

General

Brand	Oregon Scientific
Model	RMR112
Category	Thermometer
Language	English

Summary

Introduction to the Multi-Channel Thermometer

Main Features of the Main Unit

Main Unit Component Identification

Labels and describes the buttons, display, and features of the main thermometer unit.

Main Features of the Remote Unit

Remote Unit Component Identification

Details the LCD, LED, switches, and housing of the remote sensing unit.

Installation and Setup Procedures

Initial Setup Recommendations

Provides initial tips for optimal operation and setup of the thermometer system.

Remote Unit Installation

Step-by-step guide for installing batteries and setting channels/units for the remote sensor.

Main Unit Battery Installation

Instructions for installing batteries in the main thermometer unit.

Operational Guide and Features

Unit Placement and Mounting Options

Explains how to position the main and remote units using stands or wall mounts.

Temperature Monitoring and Display

How to check indoor/remote temperatures, trends, kinetic wave display, and interpret readings.

Memory and Alarm Functions

How to view/clear temperature memory and set/manage alarms.

Clock Setting and Display Modes

Describes calendar clock modes, radio reception synchronization, and manual clock setting.

Troubleshooting and Precautions

Signal Issues and Interference

Addresses disconnected signals, transmission collision, and unit placement for better reception.

Operational Notes and Warnings

Includes notes on °C/°F selection, low battery warnings, and general safety precautions.

Specifications and Compliance

Technical Specifications

Detailed technical data including temperature ranges, resolution, frequency, power, and dimensions.

Compliance and Disclaimers

Notes on regulatory compliance, including R&TTE directives, and cautions about manual content.