Oregon Scientific RMR232PHU User Manual

1
GB
Digital In-Out Thermometer
with RF Clock & Photo Frame
MODEL: RMR232PHN/RMR232PHU (UK Version)
USER'S MANUAL
INTRODUCTION
Congratulations on your purchase of the RMR232PHN/
RMR232PHU, an In-Out Thermometer with Radio-Controlled Clock
and a Photo Frame attached.
The basic package comes with the following:
-- Main unit (RMR232PHN/RMR232PHU).
-- Remote thermo sensor unit
-- Blue and metallic grey exchangeable front key panels.
The main unit shows the indoor temperature, calendar clock and
temperatures collected and transmitted by the remote unit.
The main unit is also capable of keeping track of the maximum and
minimum temperature measured. No wire installation is required
and the RMR232PHN/RMR232PHU operates at 433MHz.
As for the calendar clock, it is radio-controlled. It automatically
synchronizes its current time and date when it is brought within an
approximate 1500km radius of the radio signal generated from
Frankfurt, Germany (DCF77). (MSF 60 for UK Version)
You can also set the calendar clock manually when it is off range.
Other features include five-language display and two-minute
crescendo daily alarm.
MAIN FEATURES: MAIN UNIT
K
A
B
C
D
E
F
H
I
P
J
N
L
M
OO
G

Oregon Scientific RMR232PHU Specifications

General

Brand	Oregon Scientific
Model	RMR232PHU
Category	Thermometer
Language	English

Summary

Main Unit Features Overview

Display and Signal Indicators

Shows temperature readings and radio reception status.

Control Buttons and Functions

Details of buttons for memory, settings, alarm, reset, and units.

Remote Unit Features Overview

Remote Unit Components

Setup and Initial Operation

Before You Begin: Preparation Steps

Provides guidance on battery insertion and unit placement for optimal synchronization.

Battery Installation Guide

Instructions for installing batteries in both the main and remote units.

Key Functions and Troubleshooting

Reset Button Functionality

Getting Started Guide

Outlines initial steps after installing batteries for operation.

Temperature Display and Reading

Details how to check indoor/outdoor temperatures and kinetic wave display.

Signal Reception and Data Management

Signal Status Indicators

Maximum and Minimum Temperatures

Explains how to view, store, and clear max/min temperature records.

Disconnected Signals and Recovery

Transmission Collision and Resolution

Clock Functions

Radio Reception Details

Advanced Settings and Alarms

Manual Calendar Clock Setup

Steps to manually set the clock, date, and display language.

Setting and Arming the Daily Alarm

Instructions for setting the crescendo alarm and arming/disarming it.

Product Specifications and Compliance

Precautions for Use