To Next PageTo Next Page
Need help?Do you have a question about the Oregon Scientific RMR383HG and is the answer not in the manual?
General| Indoor Temperature Range | 0°C to 50°C (32°F to 122°F) |
|---|---|
| Outdoor Temperature Range | -20°C to 60°C (-4°F to 140°F) |
| Display | LCD |
| Accuracy | Temperature: ±1°C (±2°F), Humidity: ±5% |
| Wireless Range | 30m (100ft) in open area |
| Power Source (Main Unit) | 2 x AA batteries |
| Power Source (Remote Sensor) | 2 x AAA batteries |
| Features | Indoor/outdoor temperature and humidity |
Illustrates the front panel of the digital thermometer and its labeled components.
Buttons for navigation, setting adjustment, and data recall functions on the rear panel.
Controls for managing alarms and returning the unit to default settings.
Features for regional settings and access to the battery compartment.
Details the display section for temperature, humidity, and related icons.
Describes the display elements related to time, alarm status, and moon phase.
Identifies the physical parts of the remote sensor unit.
Guidance on inserting and selecting appropriate batteries for the main unit.
Step-by-step instructions for configuring and installing the remote sensor.
Recommendations for positioning the sensor for best signal reception and performance.
Interprets the icon indicating the status of sensor signal reception.
Procedures for initiating a sensor search and understanding signal strength indicators.
Information on how the clock automatically synchronizes its time.
Instructions for manually setting the clock if automatic synchronization fails.
Procedures for setting, toggling, and silencing the device alarm.
How to toggle temperature units and view outdoor sensor readings.
Steps to set and confirm high/low temperature or humidity alarms.
Method to silence an active alarm and its automatic reset behavior.
Explanation of the heat index and its calculation based on temperature and humidity.
How to view, toggle between readings, and control heat index display.
