EN
3
11. Temperature/humidity display for THGR122N remote
sensor
12. Outdoor humidity display for THGN500*
13. Mold alert
*
This product is designed to display the temperature and
humidity reading of THGN500 in the outdoor temperature/
humidity area only.
BACK VIEW (FIG 3)
1. Solar panel
2. : Toggle between clock, calendar and temperature/
humidity displays; enter setting mode
3. : Increase values in setting mode; activate clock
signal reception
4. : Decrease values in setting mode; deactivate clock
signal reception
5. : Activate backlight
6. RESET: Reset unit to default settings
7. °C / °F: Select temperature unit
8. Power adaptor jack
OUTDOOR SENSOR - THGN500 (FIG 4)
1. LED status indicator
2. Wall mount hole
3. Battery compartment
4. RESET hole
To Next Page
Loading...
Need help?
General
