EN
5
• The duration of the rechargeable battery’s charging or
operating time is determined by either the intensity of
sunlight or the positioning of the solar panel towards
the sun.
BACKUP POWER
CR2032 batteries
In the case when the rechargeable battery is at or nearly
at, the 2 pieces of CR2032 batteries can act as backup
power supply for the main unit.
1. Remove the battery compartment.
2. Insert the batteries, matching the polarities.
3. Press RESET after each battery change.
LOCATION MEANING
Outdoor temperature/
humidity area (THGN500)
Outdoor sensor battery low
Main unit environment area CR2032 batteries low
Remote sensor area
(THGR122N)
Remote sensor batteries
low
Clock and calendar area
(or optional sensors area)
Optional sensors batteries
low
Power adaptor (not included)
The power adaptor can also be used for charging the
rechargeable battery. When connected to the main unit,
will be displayed.
NAME TAGS
Name tags can be inserted in the main unit as in Fig. 1.
There are 10 name tags provided in this package, with 7
blank tags and 3 tags printed as “MAIN UNIT”, “TIME” and
“CALENDAR”. You can write in the blank tags the name of
the location where THGR122N and other optional sensors
are installed.
NOTE If optional sensors are installed, “CALENDAR” and
“TIME” tags will be replaced.
REMOTE SENSORS
This product can work with up to 4 sensors at any one time
to capture temperature and relative humidity readings in
various locations.
To Next Page
Loading...
Need help?
General
