What to do if the remote sensor isn't working on my Oregon Scientific Weather Station?
If the remote sensor is not working, try the following: * Check the batteries in the sensor. * Verify the sensor's location. * Initiate a manual sensor search.
How to fix the clock on my Oregon Scientific RMR602A?
To fix the clock on your Oregon Scientific Weather Station, you can try the following: * Disable the Atomic Clock feature. * Adjust the batteries. * Press the RESET button. * Manually activate the Atomic Clock feature.
General| Type | Wireless Weather Station |
|---|---|
| Display | LCD |
| Indoor Temperature | Yes |
| Outdoor Temperature | Yes |
| Indoor Humidity | Yes |
| Outdoor Humidity | Yes |
| Humidity Range | 20% to 95% |
| Radio frequency | 433 MHz |
| Wireless Range | 30 meters (100 feet) |
| Features | calendar, alarm |
| Power Source | Battery |
| Power Remote Sensor | 2 x AA batteries (not included) |
Step-by-step guide to setting up and pairing the remote sensor with the main unit.
Tips for best results when positioning the remote sensor for accurate readings.
Details on how the clock synchronizes with the US Atomic Clock signal.
Setting up, viewing, activating, and stopping alarms.
Instructions for resetting the system and general product care guidelines.
Important warnings and precautions for proper product usage and longevity.
Solutions for common problems related to the clock, temperature, and sensor.
To Next Page