EN
10
TEMPERATURE
This product can display current, maximum, and
minimum temperature readings collected by the main
unit (indoor) and remote sensor (outdoor).
Outdoor temperature data collected by the remote
sensor is updated every 78 seconds.
SELECT TEMPERATURE UNIT
Press the °C / °F button to switch between temperature
units. The button is located in the battery compartment.
MINIMUM / MAXIMUM RECORDS
Press MEM to toggle between current, maximum (MAX)
and minimum (MIN) records.
To clear the records, press and hold MEM for 2 seconds.
The current temperature readings will be shown as the
minimum and maximum records.
RESET SYSTEM
The RESET button is located in the battery
compartments for the main unit. Press RESET when
you change the batteries and whenever performance is
not behaving as expected (for example, unable to
establish radio frequency link with remote sensor or
radio-controlled clock).
When you press RESET, all settings will return
to default value, and you will lose all stored information.
SAFETY AND CARE
Clean the product with a slightly damp cloth and alcohol
- free mild detergent. Avoid dropping the product or
placing it in a high-traffic location.
NOTE
RMR602A lab test R2 1/17/04, 4:49 PM10
To Next Page
Loading...
Need help?
General
