To Next PageTo Next Page
Need help?Do you have a question about the Oregon Scientific RMR682 and is the answer not in the manual?
General| Type | Digital table clock |
|---|---|
| Form factor | Square |
| Thermometer | Yes |
| Product color | White |
| Quantity per pack | 1 pc(s) |
| Battery type | AAA |
| Number of batteries supported | 4 |
| Display type | LCD |
Weight and Dimensions| Depth | 87 mm |
|---|---|
| Width | 107 mm |
| Height | 56 mm |
| Weight | 134 g |
Details the front display elements and their functions.
Instructions for inserting batteries into the main unit and remote sensor.
Placement and environmental advice for optimal sensor performance and signal transmission.
Procedure to re-establish connection with the remote sensor if it is lost.
Details on automatic time synchronization via radio signals from Frankfurt and Rugby.
Explanation of signal strength indicators for clock synchronization.
Instructions for manually setting the clock if radio synchronization fails.
Steps to configure the alarm time and activate/deactivate it.
Method to toggle the alarm ON/OFF from the alarm display.
Procedure to stop the current alarm and prepare it for the next day.
How to switch between Celsius (°C) and Fahrenheit (°F) units.
How to display temperature readings from different remote sensors.
Enables automatic cycling through sensor data every 3 seconds.
How to manually stop the automatic sensor data scanning.
How to view historical min/max temperature readings for a sensor.
Procedure to erase all stored minimum and maximum temperature data.
Steps to enable or disable the high/low temperature alarm for channel 1.
How to stop the audible hi/lo temperature alarm temporarily.
