Oregon Scientific WGR800X - Introduction; Packaging Contents

EN
1
Integrated Wind Sensor
Model: WGR800X
USER MANUAL
CONTENTS
Introduction ...................................................................... 1
Packaging Contents ........................................................ 1
Overview ........................................................................... 2
Getting Started ................................................................. 2
Set Up Remote Integrated Wind Sensor ........................ 2
Battery Installation .......................................................... 2
Mounting the Sensor ....................................................... 2
Precautions ...................................................................... 3
Specications ................................................................... 4
About Oregon Scientic .................................................. 4
EU-declaration of Conformity ......................................... 4
Information for users ....................................................... 5
INTRODUCTION
Thank you for selecting the Oregon Scientic Integrated
Wind Sensor (WGR800X).
The sensor is battery and solar power operated. It is
capable of transmitting data to the base station wirelessly
within an approximate operating range of 100 meters
(328 feet).
NOTE
Please keep this manual handy as you use
your new product. It contains practical step-by-step
instructions, as well as technical specications and
warnings you should know about.
PACKAGING CONTENTS
1 x Wind Sensor (1
x Wind Vane Above
and 1 x Anemometer
Below)
1 x sensor
connector
2 x AA UM-3
1.5V batteries
4 x Screws
(Type A)
1 x Round
U- bolt
WGR800X_UM_300103595-00005-10_EN_R1.indd 1