Oregon Chain Saw - Chain Letter ID

14
Saw Chain

JG
Round-ground chisel
cutters with ramped
depth gauges,
bumper tie straps
and skip sequence

JP
Round-ground chisel
cutters with bumper
drive links and skip
sequence

L
Chisel cutters with
standard sequence

LG
Round-ground chisel
cutters with ramped
depth gauges and
standard sequence
(33LG is a low
vibration chain)

LP
Low-vibration, round-
ground chisel cutters
with bumper drive links
and standard sequence

LX
Power Sharp
®
chain
with ramped depth
gauges, bumper drive
links and standard
sequence (no hand
maintenance required)

M
Specially built chain
with round-ground
chisel cutters and
bumper drive links
for effective cutting
in extremely dirty or
abrasive conditions

P
Micro Chisel
®
cutters
(26P, 27P), or Chamfer
Chisel cutters (91P),
with bumper drive links
and standard sequence

R
Ripping chain with
Micro Chisel
®
cutters
and standard sequence

RA
Ripping chain with
Micro Chisel
®
cutters
and skip sequence
(27RA only)

RD
Ripping chain with
semi-chisel cutters and
standard sequence
(3/8"-pitch only)

SG
Ramped depth gauges,
bumper tie straps and
standard sequence
(72, 73, 75SG have
semi-chisel cutters.
90SG has low-vibration
chamfer-chisel cutters)

SL
Round-ground chisel
cutters with ramped
depth gauges, bumper
tie straps and standard
sequence (33SL is a
low vibration chain)

V
Low-vibration, round-
ground Vanguard chisel
cutters with standard
sequence and wide-
track depth gauges

VG
Low-vibration
semi-chisel cutters with
ramped depth gauges,
bumper tie straps and
standard sequence

VP
Low-vibration Micro
Chisel
®
cutters with
ramped depth gauges,
bumper drive links and
narrow-kerf design
(95VP only)

VS
Low-vibration semi-
chisel cutters with
ramped depth gauges
and standard sequence
(91VS only)
CHAIN LETTER IDENTIFICATION (CONTINUED)
25436_Txt_2005.qxd 9/20/2004 12:15 PM Page 14