Oregon Chain Saw - Page 48

44
Speed Guard
™
3/8"
*Recently obsoleted Oregon
®
chain part numbers
Not a Low-
kickback Chain
SEMI CHISEL
Kickback End Use
Reducing View
Features
FILING
햲
DEPTH-GAUGE
햳
TOP-PLATE
SETTING CUTTING ANGLE
햴
SIDE-PLATE
햵
TOP-PLATE
햶
FILE-GUIDE
ANGLE FILING ANGLE ANGLE
90°
30°
85°
60°
.030"
TOOLS FOR FILING
Part No. Description
70503 3/16" Round File (12-Pack)
31690 3/16" Assembled File Guide
22291 .030" Depth-gauge Tool
OR534-316 3/16" Grinding Wheel, 5-3/4" Dia.
OR4125-316 3/16" Grinding Wheel, 4-1/8" Dia.
Chains on this page are intended for use with saws up to 6.0 cu. in.
displacement (100 cc), and bars up to 30 in. length (76 cm).
Chain Type Gauge
72DG*, 72DJ* .050"
73DG* .058"
75DG* .063"
25436_Txt_2005.qxd 9/24/2004 2:21 PM Page 44