9
OREGON® CORDLESS TOOL SYSTEM
CHAIN SAW MODEL CS250
SAFETY RULES
AF 0513 F/N 547361
DANGER: NEVER MODIFY OR
ATTEMPT TO DISABLE THE CHAIN
BRAKE.
CHAIN
This saw comes equipped with a saw
chain that met the reduced kickback
requirements of ANSI B. when tested
on a representative sample of chain saws.
For replacement chain, see “Specifications
and Components” in this manual.
BAR
This saw comes equipped with a guide
bar that has a small radius nose. Small
radius noses generally have less potential
for kickback.
When replacing the bar, be sure to order
the bar listed in this manual.
STORAGE, TRANSPORTING,
AND DISPOSAL
STORING THE SAW
• Remove the battery pack and
thoroughly clean the saw. See
“Maintenance and Cleaning” in this
manual. Install the blade cover prior to
storing.
• Store in a dry place out of reach of
children or pets.
• It is normal for a small amount of oil to
seep from the bar when the chain saw is
not in use. To protect against seepage,
install the blade cover and place an
absorbent pad under the guide bar.
STORING THE BATTERY PACK
When storing the battery pack longer
than nine months, follow these
guidelines:
• Remove the battery pack from the chain
saw or charger.
• Store in a cool, dry place.
• Keep out of reach of children or pets.
• To prolong battery life, never store
battery pack in a completely discharged
condition. (Fig. ).
• Store at a temperature between -°F to
°F (-°C and °C).
STORING THE CHARGER
• Remove battery pack from the charger.
• Disconnect charger from power source.
• Store in a dry place.
• Keep out of reach of children or pets.
See “Maintenance and Cleaning” for more
information.
FIG. 5
INDICATOR LIGHTS
To Next Page
Loading...
Need help?
General
