21
Operations
Duplex
General
Your radio has a Repeater Access function to allow use of local repeater
stations (if available in your area). Repeaters are shared radio systems
installed by interested parties (clubs, local business etc.) that receive
transmissions on specic channels and re-transmit (or repeat) the
received signal to another channel.
Channel 2
Channel 32
C
h
a
n
n
e
l 2
Channel 32
Repeater Station
The Repeater Access function can be set (from channel 1 to 8 and 41
- 48) used by local repeater stations. When activated, your radio will
receive the Repeater on its specic channel (all repeater outputs are on
channel 1 to 8 and 41 to 48) but transmit to the repeater channel 31
through 38 and 71 to 78.
(Factory default is set to On for all repeater channels).
e.g.
CH01 on Duplex mode will receive on CH01 but transmit on CH31.
CH02 on Duplex mode will receive on CH02 but transmit on CH32.
If you transmit on CH01 duplex mode, you are actually transmitting on
CH31.
The repeater station receives your signal on CH31 and retransmits on
CH01.
Your UHF radio allows you to pre-select Duplex operation individually
on each channel.
To Next Page
Loading...
Need help?
General
