Oricom FS300 - Cleaning, Storage, and Specifications; Cleaning and Storage

15
Cleaning and Storage
9. Cleaning and Storage
• The sensor is a very sensitive part and easily damaged. For accurate
measurement please keep the sensor clean.
• To clean the sensor please keep it facing down and carefully clean with an alcohol
moistened cotton bud, allow to dry for at least one hour before using.
• To clean the outside use a cloth moistened with alcohol or water.
• Do not use excessive force on the sensor.
• Do not immerse the product in water or any other liquid.
• Keep the product away from direct sunlight, dust and any other type of
contaminating substance.
• Keep the product at normal room temperature. The operating ambient temperature
range for this thermometer is 10C (50F) to 40C (104F)
• Please place the product in normal room temperature for 30 minutes prior to use if
it has been stored outside normal room temperature.