Oricom UHF2500 User Manual

20
Dual watch DCS channel: Continue pressing the MENU button to
change the DCS code.
 Pressthe+ or – button to select the desired DCS code (1-83).
 PressthePTTbuttontoconrmyoursetting.
Duplex operation via Repeaters
This feature allows to use local repeater stations that are designed
to automatically re-transmit your broadcast over a large area thus
giving you increased range.
Repeaters stations are privately operated radio systems installed
throughout Australia.
For example, if you wish to access a repeater station in your area
which operates on channel 2 you only need to set the Duplex
access on this Channel.
So, if you are in the range of a local repeater which transmits on
channel 2, after setting your radio to allow access of the repeater
on that channel, you will select channel 2 as normal, but during
transmit operation your radio will automatically transmit to the
repeater on channel 32.
Turning on/off Duplex on channels
a. Select the required channel to suit the repeater station you wish
to access (Channels 1 – 8 and 41 – 48).
b.PresstheMenubuttontwice,“RPT” icon will display.
c.Pressthe+ or – button to set the Duplex function to On or Off.
d.PressthePTTbuttontoconrmyoursetting.
e.TheRPTiconwilldisplaytoindicatethatDuplexissetonthat
channel.
Operation

Oricom UHF2500 Specifications

General

Brand	Oricom
Model	UHF2500
Category	Radio
Language	English