Oricom UHF2500 User Manual

19
Setting the Roger Beep
The Roger beep is a tone which is automatically transmitted
whenever the PTT button is released. This alerts the receiving party
to inform you that you have intentionally ended the transmission,
and you are now in receive mode.
a.PresstheMENU button 11 times, the “ON” icon will
ash on the LCD Screen.
b.Pressthe+ or – button to select the Roger beep On/Off.
c.PressthePTTbuttontoconrmyoursetting.
Setting the Key Tone ON or OFF
Thisfeatureallowsyourradiounittoemitaconrmationtoneafter
pressing each button.
a.PresstheMENU button 12 times, the “ON” icon is
ashing on the LCD Screen.
b.Pressthe+ or – button to select Key tone On/Off.
c.PressthePTT buttontoconrmyoursetting.
Setting the Dual Watch Mode
Your radio is capable of monitoring two channels, the current and
another (dual watch) channel. If the unit detects a signal on either
channel, it will stop and receive the signal.
Dualwatchchannel:PresstheMENU button 13 times,
“DCM” icon will be displayed while “OFF ” ashes on the
LCD Screen.
 Pressthe+ or – button to select the Dual Watch channel
(1-80, except the current channel).
Dual watch CTCSS channel: Continue pressing the MENU
button to change the CTCSS code.
 Pressthe+ or – button to select the desired CTCSS
code (1-38).
Operation

Oricom UHF2500 Specifications

General

Brand	Oricom
Model	UHF2500
Category	Radio
Language	English