18
4. To exit the menu, press PTT button or press and hold the menu
button for 2 seconds.
The following features can be selected by using the “MENU” button:
1) User selectable 38 CTCSS and 104 DCS codes (CTCSS or DCS
cannot be enabled on channels 5 or 35)
2) Scrambler setting (Off, 1 to 5 different frequencies)
3) LCD backlight colour (3 colours)
4) LCD backlight level (Bright or Dim)
5) Voice enhancer equalizer setting (-5 to +5, 10 steps)
6) Duplex On/Off
7) Priority channel memory ( 1 to 80 Channel)
8) Scan mode (Open or priority scan)
9) Busy channel lockout (On or Off)
10) Key beep tone (On or Off)
11) Roger beep tone (On or Off)
12) Triple watch sub channel 1 setting
13) Triple watch sub channel 2 setting
14) Squelch tail (On or Off)
15) Auto power off 1 ,2 or 4 hours
16) Software version display
Operations
To Next Page
Loading...
Need help?
General
