HOW TO USE THE ALARM (ONE-TIME ALARM)
• This is a one-time alarm that sounds only once at a set time. After it sounds,
the set time is reset.
• The alarm can be set in 1-minute increments to a time up to 11 hours and
59 minutes in advance.
<How to set the time of the alarm sub-dial>
Set the time of the alarm sub-dial when you set the time of the basic watch,
etc.
Refer to SETTING THE TIME AND ADJUSTING THE STOPWATCH
HAND POSITION.
[How to set the alarm time]
(1) Pull out the crown to the first click.
* Note that you cannot operate the stopwatch with the crown in the first click
position.
This alarm sub-dial indicates the current
time when the alarm is not set, and
when the alarm is set, it indicates the
alarm time.
Crown
First click (setting the alarm time)
When the alarm is set, the alarm time
remains as indicated.
To Next Page
Loading...
