A1250 AMPLIFIER INSTALLATION USER MANUAL
19
18
A1250 AMPLIFIER INSTALLATION USER MANUAL
If you have a problem, try isolating it first. For example, if you’re playing a DVD
and there is no sound, try replacing the DVD with an MP3 player to see if you get
sound. If it does work, then the problem is with the television, DVD player, or the
cables connecting them. If it doesn’t work, the problem will be with the amplifier,
speakers, or those cables.
No Sound
The volume may be turned down or muted. Check the volume
settings on both the amplifier and the television/computer/CD
player/etc.
No Sound
Make sure the proper source is selected on the amplifier or re-
ceiver. Check amplifier is not in standby mode and needs to be
turned on (blue LED).
No Sound
Check the cord connecting the amplifier with the source. The
cord may be damaged or plugged into the wrong input or out-
put.
No Sound
Check the wires connecting the amplifier with the speakers.
Make sure they’re connected properly and not damaged in any
way.
Poor Sound
Quality
If you hear something like static, or the sound is cutting in and
out, check the audio cables. If the problem increases when a
cable is being moved, then the cable is most likely faulty or not
connected properly. Also, check RCA input cables by removing
them one at a time and verify connections.
Poor Sound
Quality
Today’s audio systems may have several places to adjust the
volume, for example your MP3 player may have a volume con-
trol, and your amplifier may also have one. Check to be certain
that the volume isn’t turned up past 80% on any device.
Poor Sound
Quality
Try changing sources to be certain that the selection you’ve
chosen is a good quality recording.
If you have any questions or concerns about installing or using this product, you
can reach us through one of the following methods:
Phone: (844) 674-4461
Hours of operation: 8:00am - 5:00pm (Pacific Time), Mon - Fri
Email: sales@originacoustics.com
If you are having technical trouble, please include the model number and
briefly explain what steps you took to resolve the problem in your email, or be
prepared to answer these questions over the phone. If you are considering
returning the product, it’s required that you contact Origin Acoustics prior to any
return attempts. This way we can determine if the issue can be resolved without
returning the product, or if needed we can provide instructions and support for
the return process.
No Power Ensure the amplifier is plugged into a live outlet.
No Power Ensure the power switch on the front panel is on (blue LED).
No Power Fuse is blown. Replace with T5AL fuse type.
No Power
The power mode may be set to the wrong mode for the system’s
configuration or setup.
To Next Page
Loading...
Need help?
General
