3
Setting Up Your FunScope
Care For Your FunScope
Carefully take the FunScope out
of its box. Remove the plastic
wrap from the FunScope,
eyepiece, and base.
Never point the FunScope at
the Sun! You can seriously hurt
your eyes!
Bring the FunScope inside when
you are finished using it.
Treat your FunScope carefully. It
could break if you drop it or treat
it roughly
Don’t touch or drop anything
inside the FunScope. Always
hold the eyepiece by its side;
don’t touch the lenses.
Place the “fat end” of the
FunScope on the base. Remove
the front cap and set it aside.
Remove the eyepiece cap and
set it aside. Insert the eyepiece
by twisting it clockwise into the
FunScope
Save the box! It makes a handy
carrying case.
To Next Page
Loading...
