Orion OLS-8410NL - SETUP A Configuration

-28- -29-

SETUP A Conguration

AUTO POWER, DISPLAY MODEL, FIRMWARE VERSION, LAN SETTING, SERIAL
SETTING, OSD, and SETUP A RESET can be adjusted in SETUP A MENU.
1. Press MENU button.

Press MENU button to display OSD MENU on the screen.
2. Select SETUP A.

Use
 
buttons to move to SETUP A menu.

Press MENU button to move into the sub-menu.

AUTO POWER, LAN SETTING, SERIAL SETTING, and OSD menu can be adjusted.

DISAPLAY MODEL and FIRMWARE VERSION also can be checked.
3. Each sub-menu can be congured.

Use
 
buttons to move to the sub-menus you want to adjust.

To congure the sub-menu, move to the sub-menu and press MENU button to
enter.
4. EXIT MENU

Press Exit button to exit from the menu.
▶
AUTO POWER Conguration

The display set can be turned on automatically as the power is on.

ON – Select the function for automatic turn on.

OFF -Deselect the function.
1. Select AUTO POWER from SETUP A menu.

Use
 
buttons to select ON or OFF.

Move to ON and press MENU button to select and move to OFF and press MENU
button to deselect.
2. EXIT MENU

Press Exit button to exit from the menu.
▶
DISPLAY MODEL Conguration

It displays the model information.
1. Select DISPLAY MODEL from SETUP A menu.

Move to DISPLAY MODEL and press MENU button to check current model name.
2. EXIT MENU

Press Exit button to exit from the menu.