19
Operating and Riding the Electric Balancer
SPEED SWITCH LOCATION
DO NOT ADD FULL POWER AND NON-KICK START AT THE SAME TIME.
Changing Modes:
After your child is proficient with the bike and you feel comfortable with
their riding ability you can start changing modes. Instructions are on the
next page.
The first change we recommend you make is to remove the kick-start (12in
only) and switch back to the slowest speed. After they get comfortable
with the twist-n-go you can change speeds until they are in the highest
speed. Once they are driving around in the fastest speed you can change
to 100% power (make sure you move the speed sw back to the lowest
speed after you add 100% power).
To Next Page
Loading...