29
Operating and Riding the Electric Balancer
CHARGING
- Insert the charger into the 110V/220V wall socket; the light on
the charger will turn green.
- Insert the plug from the charger into the charger port on the frame of
the Balancer (you might see a small spark or hear a pop, this is normal).
- The light on the charger will turn RED, indicating that the battery is
being charged. If the light does not turn RED, then the battery is
fully charged, the charger has a problem, or both. Please see the
‘Troubleshooting’ section for further instructions or contact your
dealer.
- The light will turn GREEN indicating that the battery is fully charged.
- Make sure that the bike is charged under a dry and cool conditions.
Approx. Charging Times:
5.2Ah… 2-3.5 hours, if completely drained
CAUTION: Leaving the bike in direct sunlight for a long time (5-8
hours) will harm the battery or even cause it to explode.
To Next Page
Loading...