25
Operating and Riding the Electric Balancer
SAFELY APPROACHING OR RE-MOUNTING THE Orion RXB-E
ELECTRIC BALANCE
-Teach children to approach the bike with caution; before use or while
standing back up if knocked over.
- Ensure the power switch is turned off because if they try and lift the bike
with the throttle the bike will take off and could drag them.
- Ensure all wheels/tires have stopped rotating or moving.
- Inspect for any obvious damage.
- Perform a Pre-Ride Inspection
- Have the rider mount the bike from the brake lever side. Pull the brake
lever with the left hand a kick your leg over. The brake lever has a cut
out switch built into it so the bike cannot move if the power is on and
someone twists the throttle.
- Please press the power switch to the ‘ON’ position.
- Carefully resume riding your bike.
LOADING AND UNLOADING ORION RXB-E ELECTRIC
BALANCER INTO A VEHICLE
- Ensure the power switch is turned off.
- Load into a vehicle for transport.
- After unloading, ensure that Power Switch is still switched off.
- Perform Pre-Ride Inspection.
To Next Page
Loading...