SURVEILLANCE SYSTEM
21
FOUR CHANNEL DIGITAL VIDEO RECORDER SC148
› TYPE: Hard drive operating mode.
> READ: Reading hard drive is allowed. Writing to the hard
drive is restricted.
> READ/WRITE: Reading and writing to the hard drive are
allowed.
> REDUNDANT: Backup recording files are stored in this
hard drive.
> FREE: Hard drive is not in use.
> IN USE: DVR currently recording to the hard drive.
› CAPACITY: Maximum hard drive storage space.
› CAPACITY LEFT: Remainder of the hard drive storage space.
› STATUS: Status of the hard drive.
> NORMAL: Hard drive is operating normally.
> ERROR: Hard drive is faulty.
> FREE: Hard drive is not in use.
> IN USE: DVR currently recording to the hard drive.
33 INFO > BPS
BPS displays the data transmission rate of video encoding streams.
CALCULATING DAYS OF CONTINUOUS RECORDING
Average BPS(MB/H) at 720P high setting is around 1000 MB/H
Number of days
= Hard Disk Space/((MB/H) x Number of Channels x 24 Hours)
34 INFO > LOG
Log allows monitoring of all events that occur on the DVR.
SEARCHING EVENT LOG
a Select the type of event to search for. Select from the
following types of events:
> All > System
> Config > Storage
> Alarm Event > Week Day
> Account > Playback
b Select the start date and time.
c Select the end date and time.
d Select Search to search for all events that matches the criteria
within the time span. A list shows the event logs in detail.
> INDEX: Number allocated to event.
> LOG TIME: Time of event occurence.
> TYPE: Type of event.
> LOG: Event description.
e Select Remove to clear all log entries.
35 INFO > VERSION
Version displays the system version, build date and serial
number. This information serves as a reference when tracking
any known issues with a particular version of the DVR as well as
making sure the firmware is up-to-date.
36 LOGOUT
› LOGOUT: Log out current user.
› SHUT DOWN: Turn off DVR power.
› REBOOT: Restart DVR.
Device Serial No.
To Next Page
Loading...
