Orion SC148 - 3 Connection Diagram

SURVEILLANCE SYSTEM
4
FOUR CHANNEL DIGITAL VIDEO RECORDER SC148
3 CONNECTION DIAGRAM
Connect the other end of the video cable
(BNC connector only) to the BNC video
input on the DVR rear panel.
Connect the other end of the
power cable (DC connector only)
to power splitter.
1
6 7 8 9
2
Install the mounting
bracket to your
camera. Connect the
camera to
video and
power
cables.
Connect your monitor
to the DVR HDMI or
VGA video output.
Connect your mouse to
the DVR USB input.
Connect your router to the
DVR LAN port using an
ethernet cable.
ACCESSORIES
SPEAKERS
MEMORY
DEVICE
3 4
Connect the camera
power supply to the
power splitter and
power point.
Connect the DVR
power supply to the
DVR power input
and power point.
5
Repeat steps 1 to 3 with
all four cameras.