Operator’s Compartment
Page 5
The following features and special
equipment are used for normal
vehicle operation.
1. IntelligAIRE™ Display Panel
This display panel includes 4
touch keys, a 3 digit display and
various display indicators. The
panel provides outside and
inside temperature readouts
and setpoint adjustments only.
See “IntelligAIRE™ Climate
Control System” on page 54.
2. Passenger Stop Request
Chime Unit
A single chime will be heard
from this unit when a
passenger, requesting a stop,
activates the touch tape. A
double chime notifies the
operator that a wheelchair
passenger is requesting a stop.
3. Destination Sign Keypad
This keypad is used for
destination sign message
selection and programming.
See “Operator’s Display and
Keyboard (ODK)” on page 26.
4. Driver’s Booster Blower Vent
An auxiliary blower and vent
located inside the overhead
panel, above the operator’s
roadside window, provides the
operator’s area with additional
climate control.
See “Fresh Air
Ventilation” on page 53.
5. Driver’s Pull Down Sunvisors
These adjustable pull down
mechanisms, located above the
operator windshield and
operator’s side window,
prevents eye exposure to
sunlight. A scissor type
reinforcement retains the
shades rigidity and prevents the
shade from excessive swaying.
6. Door Master Switch
The Door Master switch is a
guarded two position (NORM,
DISABLE) toggle switch used
to override a door malfunction
that is activating the door
interlock system and preventing
the service brakes and
accelerator interlocks from
releasing.
7. Exhaust Regeneration
Override Switch
The Exhaust Regeneration
Override switch is used in
situations where the front dash
HEST lamp is illuminated and
18. Alternating Current Traction
Motor (ACTM) Gear Selector
19. Door Emergency Release Valve
20. Driver’s Door Control Push
Buttons
21. Tilt/Telescopic Steering Column
Lever
LEGEND
Apply the parking or service
brakes before removing the door
master switch from its normally
guarded position to prevent the
vehicle from rolling.
To Next Page
Loading...