Wheelchair Restraint System
Page 65
WHEELCHAIR RESTRAINT SYSTEM
Mobility Device
Securement Instructions
The securement system consists of
a series of restraint belts which
anchor the mobility device, and a
lap/shoulder belt assembly for the
occupant.
Follow the instructions to safely
secure passengers with mobility aid
devices.
These instructions are also affixed
to the bottom of the flip-up seats at
each wheelchair position.
Step 1: Secure Wheelchair
1. Center the wheelchair (facing
forward) in the vehicle’s
securement position; between
the (2) front tie-downs and two
(2) rear tie-downs.
2. Secure two (2) front tie-downs:
Pull hooks and attach to a solid
frame member of the
wheelchair (Fig. A1).
Incorrect use of the securement
devices can result in serious
personal injury or death. Please
read additional warnings located
at the bottom of the wheelchair
flip-up seats.
To Next Page
Loading...