Wheelchair Ramp System
Page 64
1. To open the front door, place
the drive mode shifter selector
in NEUTRAL, apply the parking
brake, and kneel the vehicle.
2. To deploy the ramp, press the
upper part of the control switch
until the ramp has been
completely deployed.
3. To stow the ramp, press the
lower part of the ramp switch
until the ramp has stowed and
returned to its original position
in the vehicle.
4. Raise the vehicle to its normal
ride height, close the front door,
and release the parking brake.
The vehicle is now ready for
normal operation.
Ensure the ramp deploy area is
level. Damage can result if
weight is exerted unevenly on
the ramp platform.
A warning beeper, and interior
and exterior flashing lights
activate when the ramp is
energized.
To Next Page
Loading...