Driver’s Seat
Page 31
6. Suspension Limitor
This three position range limiter
allows adjustments to the
suspension. The inward
position allows full suspension
range. The middle position
limits the vertical suspension
range and the far left position
locks out the suspension
The suspension limiter should
always be in the right hand
"unlocked" position.
7. Height Adjuster
Pull out to lower and push in to
reinflate.
8. Manual Slide Release
Pulling up the handle allows the
driver to move the seat forward
or backward.
Driver’s Seat Belt
The driver’s seat comes complete
with a retractable seat belt
assembly. The seat belt is fastened
by slowly pulling the buckle over
and across the lap and then
engaging the buckle on the tongue.
A quick tug on the belt will lock the
reel device. The reel device is
self-adjusting.
The belt should be worn low and
snug on the hips to prevent
abdominal injuries during sudden
stops.
Report defective seat belts to
service/maintenance personnel.
Clean seat belts and retractors
regularly. Ensure they are free of
dust or other foreign material which
could inhibit the effectiveness, or
reduce the life of the unit.
Never use solvents or harsh
cleaners to clean seat belts.
For heavily soiled belts, wash with a
mild soap and warm water solution.
Rinse the belts thoroughly and allow
to dry.
To Next Page
Loading...