Destination Signs
Page 26
DESTINATION SIGNS
Electronic Destination
Sign
There is a front destination sign and
a side destination sign. The front
sign is located above the
windshield. The side destination
sign is located at the front curbside
window of the vehicle.
To select the required destination on
all signs, use the Operator’s Display
Keyboard located on the upper left
side of the operator’s compartment.
Operator’s Display and
Keyboard (ODK)
The operator uses the ODK to
control and verify the sign system’s
message displays during normal
operation.
Refer to the destination sign code
list of your transit authority for
programmed destination and public
relations (P/R) messages.
For further information on the ODK,
please refer to your Luminator™
display system manual.
The destination information has
been pre-programmed into the
system and cannot be modified
by the operator through the
console unit.
To Next Page
Loading...