Warning Lights and Indicators
Page 18
exhaust outlet from other items
that can be effected by high
temperatures. In such
situations, activate the Exhaust
Regeneration OFF switch,
located on the front instrument
panel.
25. Exhaust Regeneration Inhibit
Indicator
This amber indicator illuminates
to notify the operator that the
EXHAUST REGENERATION
OVERRIDE switch is activated
and no active regeneration is
possible. This may force the
necessity of a Stationary
Regeneration.
26. Wait to Start Indicator
This amber indicator will
illuminate when the Master
Switch is placed in the DAY
RUN position, prior to activating
the ENGINE START button.
This allows the Cummins ISB™
intake air grid heater to warm
up the air intake manifold to a
sufficient temperature 4.4°C
(40°F) for start up.
Once the operating
temperature has been reached,
the indicator lamp will turn OFF
and the engine will be ready for
start up.
27. Anti-Lock Braking System
(ABS) ON Indicator
This amber indicator illuminates
momentarily, for a bulb check
only, when the ABS is initially
activated.
The indicator illuminates, and
remains illuminated, when a
fault is detected in the ABS
system.
See “ABS Warning
Light” on page 35.
28. Check Engine Indicator
This amber indicator illuminates
when the engine electronic
control unit detects a
malfunction in the engine
system. This condition will NOT
prohibit safe operation of the
engine or vehicle.
Report the fault to
service/maintenance personnel
as soon as possible.
29. Hybrid Coolant Low Indicator
This red indicator illuminates
and an audible alarm sounds
when the fluid level in the MTS
coolant reservoir is low.
Report the fault to
service/maintenance personnel
immediately.
To Next Page
Loading...