Orion XTR Series - Page 4

ORION 200 BIX
XTREME SERIES CROSSOVER
The XTREME two-way crossover employs a 12 dB per octave
slope and has independent, continually adjustable crossover
points from 50Hz to 5kHz. The crossover has its own internal
power supply, balanced inputs and outputs, a signal-to-noise
ratio of 110 dB and extremely low THD figures.
ORION 300 BIQ
XTREME SERIES PREAMPLIFIER
The XTREME preamp features three equalizer controls with
adjustable frequency centers and total boost of 12 dB. The
preamp also has a volume control and dual inputs for more
than one source. Both inputs have RCA type connectors and
the primary input also offers balanced XLR connectors. A high
efficiency switching power supply produces the bipolar 15 volts
required to drive the high signal level, which further reduces
system noise.
ORION XTR100,200
STEREO POWER AMPLIFIER
Two new XTREME amplifiers round off the line. Both the
XTREME 100 and XTREME 200 have balanced inputs and a
standard DIN type input for any Orion accessory. The two mod¬
els also share peak signal indicators, a mono summing switch,
and a gain control that regulates both channels.
A completely new design in output topology has vastly
increased rise time, thus improving overall bandwidth and stability. A new design in the output sec¬
tion uses large multiple output transistors to improve overall reliability. Low impedance high current
filter capacitors in the power supply greatly improve transient response while lowering the overall
signal to noise ratio.