Need help?Do you have a question about the Orion "The Beast" Power Amplifier XTR 2250 and is the answer not in the manual?
General| Channels | 2 |
|---|---|
| Damping Factor | >200 |
| Crossover Slope | 12dB/octave |
| THD at Rated Power | 0.1% |
| Input Sensitivity | 200mV~6V |
| Bass Boost | 0 to +18 dB |
| Crossover Frequency | 50Hz-250Hz |
Defines the recommended impedance for stereo operation and mono button function.
Guidelines for mounting the amplifier in the passenger compartment, emphasizing ventilation.
Considerations for mounting the amplifier in the trunk, focusing on airflow and support.
Strict warning against mounting the amplifier in the engine compartment due to warranty void.
Details on 4-gauge power and ground wire connections, fuse placement, and battery connections.
Describes wiring for running a woofer in mono and speakers in stereo using crossovers.
Explains the configuration for running a woofer in mono and stereo speakers, detailing crossover needs.
Details RCA signal input ranges and the function of the mono and EQ buttons.
Explains DIN signal input range, DIN AUX programmability, and 15 Volt rails for accessories.
To Next Page
