Need help?Do you have a question about the Orion XTR750.4 and is the answer not in the manual?
Explains the adjustable internal crossover settings for frequency filtering.
Guides on proper power wire connection, fusing, and grounding for amplifier operation.
Illustrates wiring for a four-channel stereo speaker setup.
Illustrates wiring for a two-channel bridged speaker setup.
Illustrates wiring for a three-channel speaker setup.
Steps to verify the amplifier installation and initial system operation.
Guidance on fine-tuning audio levels and crossovers for optimal sound.
Explains how to interpret amplifier indicator lights for diagnosing issues.
Explains the adjustable internal crossover settings for frequency filtering.
Guides on proper power wire connection, fusing, and grounding for amplifier operation.
Illustrates wiring for a four-channel stereo speaker setup.
Illustrates wiring for a two-channel bridged speaker setup.
Illustrates wiring for a three-channel speaker setup.
Steps to verify the amplifier installation and initial system operation.
Guidance on fine-tuning audio levels and crossovers for optimal sound.
Explains how to interpret amplifier indicator lights for diagnosing issues.
General| Channels | 4 |
|---|---|
| Power Output | 750W |
| Frequency Response | 20Hz - 20kHz |
| THD at Rated Power | <0.05% |
| Signal to Noise Ratio | >90dB |
| Input Sensitivity | 200mV - 6V |
| Crossover Frequency | 50Hz - 500Hz |
| Fuse Rating | 40A x 2 |
| Bass Boost | 0dB - 12dB @ 45Hz |
To Next Page