25
PGM ON This configuration will allow the instrument to send and receive the Program
Change Midi information.
PGM OFF This configuration will NOT allow the instrument to send and receive the
Program Change Midi information.
Press the MIDI button again to select the PROGRAM CHANGE On/Off
CTL ON This configuration will allow the instrument to send and receive the Control
Change Midi information.
CTL OFF This configuration will NOT allow the instrument to send and receive the
Control Change Midi information.
RESET
If it should be necessary to completely erase the internal RAM memory, a very simple reset feature
is provided.
1 - Make sure that the instrument is switched off.
2 - Press and hold the [/\] and [\/] buttons
3 - Switch on the instrument while holding the [/\] and [\/] buttons down.
4 - The display shows Reseting
Do not reset the instrument if it is not necessary. All your information you have programmed
will be automatically erased from the internal RAM memory. The factory set programs will
be automatically restored.
To Next Page
Loading...
