Ormed ATRTOMOT-K1 - 3.2 Mechanics; 3.3 Others

37
Checksum
error
chipcard:
-
>
Replace
the
chipcard
(Pos.
21)
38 Unknow
chipcard
error:
-
>
Replace
the
hand
held
programming
unit
(Pos.
20)
39 A
chipcard
of
another
ARTROMOT®
product
got
used:
-
>
Format
the
chipcard;
Press
START
-> Replace the chipcard (Pos. 21)
40 Unkown
chipcard:
-
>
Replace
the
chipcard
(Pos.
21)
41 Chipcard
is
missing:
No chipcard is insert
-
>
Insert
a
chipcard
-> Replace the chipcard (Pos. 21)
42 Chipcard
write
error:
The chipcard is not writable
-
>
Replace
the
chipcard
(Pos.
21)
-> Replace the hand held programming unit (Pos. 20)
43 Chipcard
read
error
Chipcard is not readable.
-
>
Replace
the
chipcard
(Pos.
21)
-> Replace the hand held programming unit (Pos. 20)
44 Chipcard
verify
:
error
-
>
Replace
the
chipcard
(Pos.
21)
-> Replace the hand held programming unit (Pos. 20)
45 Wrong
product
combination:
Mixup between non compatible device and hand held
programming unit
-
>
Use
the
correct
hand
held
p
rogramming
unit
(Pos.
20)
46 Handset
error
internal
communication:
Invalid interchip communication inside the hand held
programming unit
-
>
Replace
the
hand
held
programming
unit
(Pos.
20)
47 Internal
communication
error
motor
control:
Internal communication error motor control.
-
>
Repl
ace
motor
control
(Pos.
25)
48 User
stoped
the
special
function
4
49
Unknown
error
in
the
motor
control:
-
>
Repl
ace
motor
control
(Pos.
25).
Chipcard is missing
-> Insert a chipcard
-> Replace the chipcard (Pos. 21)
Chipcard error
-> Replace the chipcard (Pos. 21)
->
Replace the hand held programming unit (Pos. 20)
3.2
Mechanics
The
movable
screws
should
not
be
completely
unscre
-
wed
when adjustments are being made. Make sure
that the movable screws are tightened for operation
and transport.
The frame is unstable:
Possible cause: Bolt / screws missing or loose. Tighten
the screws / bolts.
3.3
Others
Do
not
clean
the
housing
or
the
support
with
grease
or
oil.
No solvents may be used when cleaning the
ARTROMOT®-K1.