Need help?Do you have a question about the Ormed ATRTOMOT-K1 and is the answer not in the manual?
General| Brand | Ormed |
|---|---|
| Model | ATRTOMOT-K1 |
| Category | Medical Equipment |
| Language | English |
Precautions for safe operation including power handling, ESD, and chip cards. Details initial troubleshooting for common errors like potentiometer or motor driver issues.
Guidance on adjusting movable screws, ensuring they are tightened for transport and operation, and addressing frame instability due to loose bolts.
Instructions on cleaning the device housing and support without grease or oil, and a prohibition on using solvents for cleaning.
Procedure for calibrating the ARTROMOT®-K1 device, including attention points and steps for setting femur length and performing the calibration sequence.
Instructions on how to adjust the display contrast from 0-100% using the '+' or '-' buttons and saving the settings.
How to access and interpret the error log, showing error messages, causer symbols, and navigating entries.
Procedure to check the device runtime in hours by accessing the service menu and the dedicated function.
Steps to calibrate the ARTROMOT®-K1 Classic, including initial setup, extension/flexion control usage, and success criteria.
How to adjust the display contrast percentage on the ARTROMOT®-K1 Classic using speed control and value adjustment buttons.
Guide to viewing the error log on ARTROMOT®-K1 Classic, showing message details, causer symbols, and navigation methods.
Instructions to view the device runtime in hours for the ARTROMOT®-K1 Classic by keeping the Flexion control pressed.
Steps to remove the housing cover of the ARTROMOT®-K1, including loosening specific screws and disconnecting the power cord.
Procedure for replacing the motor control unit, involving housing removal, connector disconnection, screw loosening, and reassembly.
Guide to replacing the power supply electronics, including removing the housing, disconnecting connectors, and securing the new unit.
To Next Page
