Two methods for locating multiple victims:
• micro-search stripes
• ORTOVOX sector method
MICRO-SEARCH-STRIPES
Once the 1st victim has been located and rescued by helpers,
the search stripes have to be set at 5 m intervals. The avalanche area
is searched for victims in this way. The S1 now scans circular areas
with a diameter of max. 10 m and every victim in this circle is shown.
Function "4+"
The full range (approx. 50m) is available for locating the
first signal. After marking the first signal the range is
limited to approx. 5m.
Consequently the search strips should be reduced to a
width of 5 m. The restriction to a 5 m search strip width
is shown by two black bars on the side of the display.
54
To Next Page
Loading...
