58
Attention: If the switch to automatic transmission is switched off, then
the S1 will NOT automatically switch back to transmission mode if
someone is buried by a subsequent avalanche!
Information about device number, software version,
receiver function and battery capacity
The sub-menu shows
• device number
• software version
• transmitter/receiver function and
• current battery status
Display contrast setting
The desired contrast is set using the “menu” button (3)
and retained with the “OK” button (2).
Update
The S1 can be connected to a computer via it's
infrared sensors and an additional infrared scanner
(accessorie) for:
• update/upgrade
• printout and management of transceiver's functions
For more information click www.ortovox.com
To Next Page
Loading...
