48GB
QuicK RefeRence
RemOVing flagging/digging OuT
REMOVING FLAGGING
By pressing the “OK” button (2) again
for 2 seconds, the flagging carried out
before can be removed. The crossed
out flag in the soft key line (bottom
left) shows that it is possible to re-
move the flaggings.
If there is a second (or third) victim
within a 3 m circumference, the signal
first found cannot be removed.
In this case, as soon as the first victim
is flagged, fine location of the 2nd vic-
tim starts; after that, fine location of
other victims takes place one after the
other if need be!
VICTIM IS BEHIND THE
RESCUER
If the victim is shown behind your own
position, then change the direction
you are walking in by 180°, home in
on the victim again and walk towards
him.
DIGGING OUT
In the event of shallow burial depths
(less than 0.5m), start digging out im-
mediately along the probe and clear-
ing the airway. In the event of deeper
burial depths, digging out is started
facing down the slope in accordance
with this burial depth.
In doing so, take care to preserve
any air pocket!
To Next Page
Loading...
