EasyManua.ls Logo

Oru Kayak BAY+ - Disassembling: Folding Kayak into Box; Prepare Kayak for Folding Process; Remove Folding Obstructions

Oru Kayak BAY+
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Disassembling the Oru Kayak is basically
a simple reversal of the assembly.
However, there are a few tricks. Follow these
directions to learn how to pack your
Oru Kayak back into its box quickly and easily.
NOTE: Some water may collect inside the
plastic corrugations. To let it escape, flip the
unfolded kayak upside down to let it drain out,
before moving on to Step 6.
The Oru Kayak box holds all the loose compo-
nents, and can also fit a paddle, PFD (person-
al flotation device), and other accessories.
At first, the box may take some effort to close,
but with use, folding it up will become easier.
The shoulder strap makes it easy to carry the
Oru Kayak short distances; for longer trips we
recommend our Oru Pack, available from
Oru Kayak.
Back on land: Folding your Oru Kayak into its box
WWW.ORUKAYAK.COM 15
Unclip the fairings and fully loosen the
end straps at bow and stern (as shown).
IMPORTANT: Remove the two loose
seam channels (applied in Step 3).
Remove the backrest.
Remove rubber deck straps, and open
all eight ratchet buckles by lifting up on
Y-shaped lever and pulling finger loop.
1
2
43

Related product manuals