ORVIBO OLOCK - Mounting Exterior and Interior Panels; Install Exterior Assembly Panel; Install Interior Assembly Panel

09
① Route the cable through the interior assembly mounting plate.
Secure the mounting plate to the interior doorframe with 2
pcs M4x30 screws. (or use 2pcs M4×35 Screws as needed)
Step 3: Install the Exterior Assembly Panel.
Install the exterior assembly panel outside of the door:
① Pass the connecting wire through under the deadbolt.
② Turn the key drive lever to align with horizontal line.
③ Insert the key drive lever into the drive hole of the deadbolt.
④ Install the Exterior Assembly Panel.
Step 4: Install the Interior Assembly Panel