ORVIBO OLOCK - Drilling Holes for Installation; Hole Diameter and Depth Specifications; Slot Dimensions for Hardware

05
3. Drilling holes
① The lock hole diameter is 2" [50mm].
② The deadbolt hole diameter is 1
" [25mm] , depth is 4" [100mm].
The deadbolt slot size is 2.3
"[58mm] x 1.04"[26.5mm] x 0.16"
[4mm] (d).
③ The size of the installation slot for the strike plate is
1.03
" [26mm] x2.25" [57mm] x0.1" [2.5mm] (d).
The size of the installation slot for the strike box is
0.87
" [22mm] x 1.18" [30mm] x 1.18" [30mm] (d).
1.03"[26mm] x 2.25"[57mm] x 0.1"[2.5mm] (d)
0.87"[22mm] x 1.18"[30mm] x 1.18"[30mm] (d)
φ 2" [50 mm]
φ 1"[25mm]
2.3"[58mm]x1.04"
[26.5mm]x0.16"
[4mm](d)
Depth: 4"[100mm]