ORVIBO OLOCK - Adjusting Door Direction; Confirm Door Opening Direction; Set Motor Steering and Knob

06
4. Adjust Direction
① Confirm the door opening direction according to the
picture below.
② Left Bolt: Set the motor steering and indoor knob to L
Right Bolt: Set the motor steering and indoor knob to R
a. Turn the indoor knob to make the arrow point to L or R.
(Refer A)
b. Turn the motor steering to L or R on the Printed Circuit Board.
(Refer B)
Left Bolt Right Bolt
Notice: View from outside of the door
A: Indoor knob
B: The motor steering
A
B