Oryx SCA 3600 - Page 22

22
Problem
Probable Causes
What to Do
After several
hours parts
don’t appear to
be much cleaner
The cleaning solution
is likely saturated
with support
material.
Drain the tank and add fresh water and cleaning
solution.
Type of cleaning
agent.
If using EcoWorks, try switching to WaterWorks.
WaterWorks is a more efficient cleaning concentrate.
Liquid Level
indicators did
not turn off
when liquid was
added/removed
from the tank
Sensors or Indicators
have failed
Contact technical support
System is
draining slowly
Drain strainer is
clogged
While wearing gloves, reach into the water and remove
any large pieces of debris from the drain strainer. If
necessary, clean the drain strainer with a toothbrush
without removing the strainer.
Resume draining.
Never drain without the strainer in place.